Selecting the proper frame design when mounting brand-new windows in Overland Park - Roofing Contractor Overland ParkRoofing Contractor Overland Park

Selecting the proper frame design when mounting brand-new windows in Overland Park

Windows Replacement: Selecting the appropriate frame design

Recently, I told you exactly how to measure for your vinyl replacement windows when replacing aluminum windows. Since you’re ready to buy your new vinyl substitute windows, we need to speak about the various frame style choices available. In most of the country your choices are restricted to either brand-new building and construction or replacement structures. New building frames feature a nailing fin to attach the frame to the studs throughout the building of the brand-new residence. The replacement frame is generally the brand-new construction frame minus the nailing fin.

Yet in the west, where stucco homes are common, makers developed a 3rd sort of frame called a retrofit frame. The retrofit frame has a fin concerning 2 inches broad, situated flush with the outside face of the window. This is the most effective option when replacing old windows, yet not all jobs will certainly accommodate a retrofit frame application. So let’s discuss how to determine which frame is most likely to work for you.

If you have a stucco outside, retrofit is the means to go. You install the brand-new window from the outside, and the flush fin covers the old aluminum frame that you are going to leave in place. After that you screw the new home window in operation deck screws with the side channels in addition to the leading header. We will get involved in even more information on the actual setup in a future post. If you have a stucco outside, however there is a wood trim around the opening of the window where the flush fin would typically go, you can still use the retrofit style frame. You would need to eliminate the wood surrounding the opening, set up the retrofit home window, after that acquisition and also mount brand-new wood trim. The old trim will certainly no longer fit since the retrofit home window frame measurements will certainly be bigger in size as well as height than the old home window frame. An additional option is to install the retrofit fin in addition to the wood trim. You can do this as long as the depth from the face of the wood trim to the point in your house of the inner part of the old aluminum frame is less than 3 inches deep. The reason is since a top quality retrofit window will have a 3 inch frame deepness from the rear of the flush fin to the innermost part of the frame. That innermost part requires to be additionally right into the house than the inner component of the aluminum frame to make sure that the aluminum frame will certainly be concealed after we use the within trim. What if you have brick around the home window openings? Or home siding? Then what?

Well, if you can mount the window against the face of the block or siding and also still have the inner component of the vinyl frame be better right into the residence than the old frame, then you can use the retrofit style frame. Otherwise, then you need to utilize the substitute design frame, after that utilize trim to complete the exterior. If you are able to get a retrofit frame with a reasonably slim fin, you can also trim the fins so the home window fits between the block or wood. That would eliminate the demand to trim out the exterior. Some suppliers of retrofit frames will certainly have grooves in the back of the retrofit fins. You just run an utility blade in the groove up until you are able to break off that item of the fin.

The bottom line to remember when determining whether to use a retrofit frame or a common replacement frame is that in order to utilize the retrofit frame there needs to be much less than 3 inches from the outside point where the flush fin will rest to the inside point in the area where the old frame ends. If it’s less than 3 inches, opt for the retro, greater than 3 inches, use the replacement frame and add trim to the outdoors instead of the flush fin.